Jump to content
AUSTRALIAN DJ FORUMS

Leaderboard


Popular Content

Showing content with the highest reputation since 16/09/19 in Posts

  1. 2 points
    Mitch

    Locating a song!!

    The EP used to be up on the bandcamp site with a link to a free download which is when I got it... Just checked back and the link is still there but doesn't work anymore 🙁 I did find the individual track on bandcamp for purchase though https://fatimayamaha.bandcamp.com/track/whats-a-girl-to-do If you can find this JV edit anywhere as well it's a pretty sick version
  2. 1 point
    Hi, am putting together a techno set and want to play at the end "sweetness and light" for nostalgia sake but am struggling to find a track that I can mix it with that doesn't sound totally unmatched or crap. HELP - any ideas or suggestions please.
  3. 1 point
    This is the track you're talking about. Sounds around 145BPM Most 90's techno/trance-ish songs should go OK. Will post a couple of examples later when on my laptop with music.
  4. 1 point
    Craig

    Locating a song!!

    You're kidding me........ I searched there but nothing was found. Scattered Saturday morning hang over strikes once again. Cheer man
  5. 1 point
    Hi, am putting together a techno set and want to play at the end "sweetness and light" for nostalgia sake but am struggling to find a track that I can mix it with that doesn't sound totally unmatched or crap. HELP - any ideas or suggestions please
  6. 1 point
    NitroMonkey

    Locating a song!!

    You didn't search really hard did you? It is in the itunes store. Go there. Took me 5 seconds to find it
  7. 1 point
    First point, find something in key. Second point, Techno is rarely produced with the key in mind. Third point, do what Cupe said, post a link of the track you want to end the mix with.
  8. 1 point
    Incorporate - Lightyears EP [I:A / Inception:Audio] The term INCORPORATE not only stands for „absorbing reality into music“ but also for integrating different ways to do so. That's what Constantin, Florian, and Yan actually do. They all work on music differently, they have different strengths and weaknesses and approaches to handle them and they live very different lifes. These contrasts form the inner core of the creativity behind the project. They overcome the principles of similarity and build up on the synergies that derive. They borrow ideas from the Past, the Present and the Future and they call it dark, deep and minimal Drum & Bass. Incorporate - Lightyears EP [IA015] 01 / Incorporate - Hidden Path 02 / Incorporate - Lightyears Away 03 / Incorporate - Never Say Never 04 / Incorporate - Things About To Happen Look for this one at digital stores via: https://inceptionaudio.bandcamp.com/album/inception-audio-ia015-lightyears-ep https://www.beatport.com/release/lightyears-ep/2706947 ** Stream here: https://soundcloud.com/inceptionaudio/sets/i-a-inception-audio https://open.spotify.com/album/5IRa9T2KxHTxCJ1D0ETJnE ** Follow to support: https://inceptionaudio.com https://soundcloud.com/incorporate-dnb
  9. 1 point
    Craig

    *Live* Funky Tech House

    No better ay to kickoff the long weenend than with some fnky tech house. All for your listening pleasure. https://soundcloud.com/craigggee/live-tech-funk Showing some loves always helps 😋
  10. 1 point
    Craig

    *Live* Funky Tech House

    Thanks man, I know it's a small contribution but any traffic flow for the site helps.
  11. 1 point
    LabRat

    Stanton ST150 Turntable Rebuild

    Ladies, Gents and esteemed guests; I pulled my turntables out of storage the other week to find that after a year and a half of being tucked away, something ridiculous happened to all the plastics and rubber parts. I'm not sure what caused it but it became all sticky and gross. The base and all the buttons were stuffed. It's like that feeling when you pull off a sticker after a long time and all the adhesive is left behind. I plugged them in to make sure they still work and so far so good but I didn't want to keep them in this condition. After ringing around for parts and such it became increasingly difficult to find anyone who cared. I called the distributer and they said they may have some second hand bits laying around but no bueno so I decided to pull them apart and clean them up myself. Since they were going to be apart, I've decided that I'm going to wrap the faceplate and do the dicer mod! Quick Note - make sure you keep everything labeled! Take lots of photos and put any parts in labeled zip lock bags so the assembly is much easier Here's as they were when I pulled them out of storage You might be able to see the difference in the plastic. The shinier side is where I scrapped a bit of the adhesive off, and the matte is the gunk. So time to dismantle. There's next to no information about these online so it's a guessing game at the moment. The platter pops right off revealing a few screws. Since I'm wrapping the face plate I need to remove the screws (which I've already done around the platter) the other 4 are unnecessary. There's about 10 screws holding the base together. You can see by the finger prints how stuffed these are Once the screws are out, you can wiggle the base off. Try not to yank it when doing so. Be gentle, it'll come off I'm skipping a massive part here but can go int greater detail if requested. It's good to have an old pillow to rest the face plate down on as the hardness of a table could damage the tone arm, buttons or circuitry. To make a long story short, the tone arm isn't clipped in, it's straight wires from the circuit board right through to the carts. This makes it a bit difficult to remove. You'll require a soldering iron here and some basic soldering skills. It's best to melt the solder on the circuit board to remove the wires. I accidentally snapped mine. It's very easy to do as the wires are so thin so be careful. So this is my current situation. I need to clean all my parts now so it'll be some time before I post updates. Once the parts are cleaned I'll be wrapping the face plate and replacing the decals on the face too. Unfortunately the cleaning product you need to use will remove all text and any kind of printed labels or stickers so you'll need to have these remade if you want to keep them in the future. As I work in the sign and graphics industry this is easy and cheap for me to do myself. I'll probably be doing some custom labels on it rather than replacing the original logos but we'll see how it goes. Hopefully in my next update I'll have my colour chosen too
  12. 1 point
    LabRat

    Suggestions - Mac Pro Build

    don't be like that ps- I use windows to run my vinyl cutter. there's nothing on it apart from the software and drivers purely to run the cutter and I've had more issues with that then I've ever had in the 14 years I've been using a Mac
  13. 0 points
    Just do a backspin and drop it in lolz
  14. 0 points
    BeatLeSS

    *Live* Funky Tech House

    Bigups for the continuous mix posting homie! Digging the mixes!
  15. -1 points
    I hear masturbating with a cheese greater works too.
This leaderboard is set to Melbourne/GMT+11:00



×
×
  • Create New...