Jump to content
AUSTRALIAN DJ FORUMS

Recommended Posts

Posted

the pad control is just like all other usb midi controllers ...it has no audio output , only midi

ok ...to set it up with USB...[ after you have installed the midi driver...if needed ]

plug it to your P.C by usb and plug the 6v power...and power it on

open your DWS software and set up the audio sound card you are going to be using

now on your pad control , set the pre-set to number 2 { GM MIDI }....The pre-sets are for setting up other DWS ....there a pre-set for ABLETON and CueBass......number 2 is GM MIDI....GM MIDI is like a standed midi..

open up a sample rack or drum rack in your DWS .....in the sample or drum rack each instrument in the rack will have a midi note number

set the note number to be the same as the note number in the DWS software instrument you would like to play on the pad..

on the pad control you uses the function pad/button and the up and down pad/buttons to change from presets [ midi setting for other DWS's..] to note numbers [what midi note the pad's is set to...] to velocity C [ how hard you hit the pads]..

this vid might help...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Sundo Trading Cards & Collectables