Technics SL-1200MK2

[Cupe]

The Technics SL1200MK2 is probably the most used piece of equipment in the history of the DJ-scene. It is a reference to where competition is measured. Even when a new CD deck is introduced people will always compare it's performance again this legendary turntable : Technics SL1200MK2. I've made modifications to my SL1200's in a rather complete way : Lead's Technics SL1210LTD. Normal people would only mount a deckplate over the body of their turntables. This is a non-permanent way of coloring your decks.

SL1200 or SL1210?

Let's get ride of the rumors for good : There is absolutely NO DIFFERENCE in technical performance between the silver Technics SL1200MK2(or MK5) and the black SL1210MK2(or MK5). The only difference is the color of the aluminum housing.

Actually the black version was meant to be for the european market with it's voltage selector beneath the platter. Nowadays all SL's have a voltage selector which makes both deck absolutely equal.

History of a Legend

This is the historical timeline of the life of the Technics SL12xx series. There is a lot misunderstanding about this and some younger people might forget. The Technics SL-1200 is found side to side with DJs everywhere.

Power Switch

To turn the SL on and off, you rotate the black disc on top of the Stroboscope (left side). Rotate it clockwise to turn the power on, counter clockwise to turn it off again.

Stroboscope Light and Dotted Rim

The engineers have designed the pattern of the dots on the rotating platter in a very clever way. The dots give a visual indication of the speed when the platter rotates. Check for the index just below the stroboscope itself. When the dots don't move in a ring you can find the speed in the index. When the dots are 'running' in a certain direction the speed of the platter is just below or above the speed in the index.

Play/Pause

With Play/Pause you can start the rotation of the platter, or when it's rotating you can brake it. After you hit the brake the platter will usually stop within a quarter rotation. This is an adjustable setting inside the SL and it might not be set right on every deck you'll find so don't rely on it that it sound the same everywhere.

33 1/3 and 45 RPM Selector

With these selector you have to choose the playing speed of the platter. Most 12" vinyl records with 1 track need 45 RPM, all others 33 1/3. Although this is no hard rule you could use it as a general guideline.

Pitch bend trick when on 33 1/3 RPM

Some people use a little pitch-bending trick when the 33 1/3 RPM mode is selected. When a track is playing you can hold down the 33 1/3 RPM button and at the same time press the 45 RPM button. The speed will increase to 45 RPM but when you use it with tiny little pushes you can perform an un hearable positive pitch-bend.

Weight

The position of this counter weight sets the pressure on the needle and is measured in grams. The black ring (with scale printed) rotates separate from the rest of the weight so you can easily set the 0-point to the right place. After you mounted your needle and element you'll need to balance the arm. Just put the needle somewhere in the center of the platter and rotate the weight to change it's position back and forward. When you reach a complete balance the arm is in horizontal position, just floating around. Now hold the weight and turn the ring with scale so the 0 lines up with the marker line that is carved in the arm. Now your 0-point is set, rotate the weight (the scaling will move along with it) to adjust the needle pressure. When moved towards the base of the arm, you'll increase the weight. Read the number of grams from the scale. Usually 4-5 grams will do the job.

More Weight? Keep it in balance.

When the weight is in it's most forward position and you need more pressure you can take of the weight, rotate it 180 degrees and put it back on. The scaling will now point backwards. When you move the weight to the front again you will have a few grams more.

Anti-Skating

This knob adjusts a spring that can give the arm a force outwards. To make the correct setting put on a record with a nice blank part (mostly found near the center of the records, or between 2 tracks). Adjust the force so that the needle and arm keeps their position. The higher value you give the Anti Skating, the more force outwards is given.

During a set I sometime make adjustments to the Anti Skating, sometime some records seem to need it.

Tone arm Height

The height of the arm is dependant of the type of needle you use. Every needle has his own specific height. You can find this in the instructions that are enclosed with the needle.

Unlock the Mechanism

To adjust the height you first need to loosen the lock that hold the mechanism. Look at the right back side of the arm section for the lock as shown here.

Adjust the Height

Rotate the ring with the scale printed on to adjust the height of the arm. Read the height with the read marker (red line). When the mechanism is unlocked, you can adjust the height from 0 to 6 mm.

Specifications:

Type Quartz Direct Drive Turntable

Motor Brushless DC motor

Platter 332mm diameter Aluminum diecast, weight 2kg

Torque

1.5 kg/cm

Speeds 33 1/3 and 45 RPM

Pitch ± 8 %

Wow & Flutter

0.035% Wrms (max)

Rumble -56 dB (IEC 98A unweighted)

-78 dB (IEC 98A weighted)

Power Requirements

110-120/220-240V, 50/60Hz

Power consumption 16 W

Net Weight 12.5 kg

Dimensions ( WxDxH ) 453 x 360 x 162 mm

Accessories Headshell, weights, cover, 45RPM adapter